1984 Honda Atv TRX200 200 Fourtrax REBUILT Cylinder Head

Is your old atc smoking or low on compression?

The valves could be the cause of your problem.

Bring it back to life today!!

This is a head rebuild service for your Honda 1980 185, 1981-83 185S, 1983-85 200X, 1984-86 200M, 1984-86 200S, 1982-83 200E Big Red and 1984 200ES Big red three-wheeler and 1984 TRX200 Fourtrax four-wheeler.

You mail in your old head to us, and we'll remanufacture it and send it back to you ready to bolt on and go for a quick and easy top end rebuild.  

PLEASE NOTE: you will be required to mail in your old cylinder head so we can machine it.

 

Here's what's included with this remanufacturing service:

1. Your head will be hydrosonically cleaned and beadblasted.
2. We will then check the guides to make sure they are in spec, and we will measure the spring free length to make sure they've not collapsed.  90% of the time the valve guides and springs are within spec and still good so they are reused. We do, however, tumble clean all the parts so they come out very clean and look like new. If, however, your head needs new guides or springs, there will be an additional charge for these items.
3. We will re-cut valve seats and install NEW valves and NEW valve stem seals.
4. We will lap in the valves and the final step we vaccuum pressure check the head to make sure the valves are sealing properly.

Let's face it. All machine work is not equal.  When it comes to machining, you get what you pay for.  We invest the time in every cylinder that we sell to provide only the highest quality workmanship to very strict tolerances making our machine work second to none.We have shops all around the world that rely on us every day to provide them with the quality machining they've come to expect over the years. The machining you receive will be to the same quality standards. Simply mail us your old head with payment, and we can get you up and running again. We also offer repair manuals as well. These will walk you through every step of the disassembly and rebuild and also include tolerances, torque specs etc, so be sure to check it out.